Figure 5-9:
5.2.2.11
[8]: Frequency Output Cards: Wiring
Additional installation instructions for the following option card models:
Frequency Output cards:
For the cable installation, follow the steps detailed below:
a.
Install the coax cable(s) onto the main PCB, connecting them to the first
available open connectors, from J4 to J7. See figure below:
SecureSync 2400 User Manual
Ribbon cable installation
Caution:
Ensure that the ribbon cable is aligned and fastened
properly to all pins on the connector of the card. Otherwise,
damage to equipment may result during power up.
1MHz (PN 1204-26)
5MHz (PN 1204-08)
10 MHz (PN 1204-0C)
10 MHz (PN 1204-1C)
APPENDIX
381