Time Code Data Formats - Safran SecureSync 2400 User Manual

APPENDIX
slaacget
slaacset
stateset
status
stlgetinfo
swupgrade
syncstate
testevent
tfomget
timeget
timeset
unrestrict
version
vlanadd
vlandel
yearget
yearset
zeroize
5.4

Time Code Data Formats

This section describes the different time code data format selections available for
use with SecureSync option cards that accept ASCII data streams as inputs or
outputs via their RS-485 and RS-232 interfaces.
560
Command
Displays whether SLAAC is enabled
Used to enable or disable SLAAC
Enable or disable an entry in the reference priority table. index = 0...15.
state = 0 (disable), 1 (enable)
Displays information about the oscillator disciplining
Provides STL data
Performs system upgrade using the update bundle provided
Display timing system synchronization state
Generates SNMP events in the enterprise MIB
Displays current estimated system time error (TFOM – Time Figure of
Merit)
Displays current system time (time is displayed in the configured
timescale – See
timescale)
Used to manually set the current time (hours, minutes in seconds);
time is entered based on the configured timescale – See
command to retrieve the configured timescale
Used for clearing access control restrictions to SecureSync
Displays the installed main SecureSync and timing system software
versions
Add a VLAN connection
Delete a VLAN connection
Displays the current year
Used to set the current year
Applicable to SAASM-equipped SecureSync units only
Description
scaleget
command to retrieve the configured
scaleget
SecureSync 2400 User Manual