Https; Accessing The Https Setup Window - Safran SecureSync 2400 User Manual

2.14.6

HTTPS

HTTPS stands for HyperText Transfer Protocol over SSL (Secure Socket Layer).
This TCP/IP protocol is used to transfer and display data securely by adding an
encryption layer to protect the integrity and privacy of data traffic. Certificates
issued by trusted authorities are used for sender/recipient authentication.
Note that SecureSync supports two different modes of HTTPS operation: The
Standard HTTPS Level (default), and a High-Security Level. For more inform-
ation, see
2.14.6.1

Accessing the HTTPS Setup Window

1. Navigate to
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2
IPv6—
2001:db8::/48
b8:0:ffff:ffff:ffff:ffff:ffff.
5. Click the Add button in the
6. The established rule appears in the
Click the Delete button next to an existing rule, if you want to
Note: In order to configure HTTPS, you need
ADMINISTRATOR rights.
"HTTPS Security Levels" on
MANAGEMENT
MANAGEMENT > Network
2.14 Configure Network Settings
, representing
2001:db8:0:0:0:0:0:0
Action column to add the new rule.
Network Access Rules
page 296.
> NETWORK: HTTPS Setup
Setup, and click HTTPS
to
2001:d-
window.
delete it.
(or, navigate to
in the Actions panel on
81