2.20 Configuring Outputs
4. Click Submit.
2.20.4 Configure an ASCII Output
An ASCII Output is available by default and configuration through the Multi-I/O
connector (see
To configure the ASCII Output, go to its Edit window.
The Output Edit window allows the configuration of the following settings:
172
"Configurable Connectors" on
Format Group
– configures the message format type. Choices are:
None (no message will be output)
Spectracom
NMEA
BBC
ICD-153
EndRun
page 157).
CHAPTER
•
2
SecureSync 2400 User Manual Rev. 5.2