Safran SecureSync 2400 User Manual page 388

APPENDIX
b.
c. Identify your installation steps via the table below.
372
Inspect the back of the SecureSync housing, and select an empty slot for
the new card. If the card is to be installed in one of the upper slots (4, or 6),
take note if the corresponding lower slot (3 or 5) is occupied.
Slots 1 and 2 always have an occupied slot below them.
Units must be equipped with an Extension Board to fill option card slots
3, 4, 5, and 6.
Figure 5-2: Unit rear view
Figure 5-3: Unit internal view (from rear)
i. Find your part number
special installation steps or specific locations.
ii. Choose your Installation Location
iii. If using slots 4 or 6, select either the
"populated"
iv. Note or highlight the
scenario and follow the procedure step by step.
in the left-hand column. Some cards require
(as determined above).
Bottom Slot
PROCEDURE STEPS [x]
row "empty" or
for your installation
SecureSync 2400 User Manual