Checklist Ntp Configuration; The Ntp Setup Screen - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

2.15 Configure NTP

You can either enable or completely disable the NTP Service. When NTP is dis-

abled, no NTP time packets will be sent out to the network. When enabled, by

default, the NTP Service operates in

to NTP requests only.

Checklist NTP Configuration

The following is a list of configuration settings you may want to consider as you

setup your NTP Service. (Not all items may apply to your application, or there

may be other considerations not included in this list.)

1. Did you setup your NTP Service and have it use the right Reference(s)?

2. Does your NTP Service use the right Timescale?

3. If required, have you setup other

To open the NTP Setup screen, navigate to MANAGEMENT > NTP Setup. The

NTP Setup screen is divided into 5 panels:

In order to configure NTP, you need to access the NTP Setup

screen which requires ADMINISTRATOR rights.

"NTP Reference Configuration" on

"NTP Output Timescale" on

"NTP Peers: Adding, Configuring, Removing" on

screen provides access to all NTP configuration settings.

mode, i.e. the NTP Service responds

NTP Servers and Peers

SecureSync 2400 User Manual Rev. 5.2

for fallback pur-