Web Ui Security; Https Security Levels - Safran SecureSync 2400 User Manual

4.3 Managing Users and Security
4. Click the
5. To
4.3.7

Web UI Security

The SecureSync Web UI has recommended user settings that will increase the
security of the product.
If your settings differ from the recommended ones, a security icon will appear in
the upper right of the banner.
To view the security issues for your unit, log in to the Web UI and navigate to
TOOLS > Security Issues. You can also click on the security issues icon to be dir-
ected to this page.
From the Security Issues Web UI page, you can review the warnings listed for
your unit. You can also select active warnings and either click to be redirected to
the correct feild to fix the warning. You may also choose to ignore these warn-
ings. Correcting or ignoring the warnings will both remove the warning symbol
from your Web UI banner.
4.3.8

HTTPS Security Levels

SecureSync supports two different modes of HTTPS operation:
296
IPv6: Enables IPv6 and reveals a field to select a Parent Interface.
Secret Key: The same encryption key as used on the TACACS+
server.
Add Server
added will be displayed if the server could be added, and the server will be
added to the list. The server status can be:
DISABLED: The TACACS+ service is disabled.
UNREACHABLE: This TACACS+ server cannot be reached.
REACHABLE: This TACACS+ server can be reached.
remove a TACACS+ server from the list, click the X-button in the
Actions column.
Note: SecureSync supports multiple TACACS+ servers. The system
performance, however, will be negatively affected by a large number
of servers or invalid servers, respectively.
Disable HTTP functionality
Disable Telnet functionality
Upload an HTTPS certificate that is not self-signed, and
Upload an HTTPS certificate with a secure algorithm
button. A confirmation message
CHAPTER
The item has been
•
4 SecureSync 2400 User Manual Rev. 5.2