Spectracom Format 1S - Safran SecureSync 2400 User Manual

APPENDIX
* When the receiver time is derived from the battery backed clock or set manually through
the Setup Port Interface.
E x a m p l e :
FRI 20APR01 12:45:36
The example data stream provides the following information:
Sync
Status
Date
Time
5.4.6

Spectracom Format 1S

Format 1S (Space) is very similar to Format 1, with the exception of a space being
the first character of Days 1 through 9 of each month (instead of the leading "0"
which is present in Format 1).
Most external systems utilizing Data Format 1 will look for a single digit day of the
month for day 1 through day 9, with a space in front of each digit (^1, ^2, ^3 ... 10,
11...) whereas other systems need to see a two digit day of the month for all days 1
through 9 with a leading 0 instead of a space (01, 02, 03... 10, 11...).
E x a m p l e
CR LF I ^ WWW ^ DDMMMYY ^ HH:MM:SS CR LF
Where:
CR
LF
566
The clock is not time synchronized to GNSS. Time is derived from the battery
backed clock or set manually
Friday, April 23, 2015
12:45:36
If your device requires the single digit day of the month for days 1 through 9
(i.e. 1, 2, etc.), select Format 1S.
If your device requires the two digit day of the month for days 1 through 9
(i.e. 01, 02, etc.), select Format 1 instead. Refer to
page 564 for information on Format 1.
m e s s a g e :
Carriage Return
Line Feed
"Spectracom Format 1" on
SecureSync 2400 User Manual