Table of Contents
Advertisement
APPENDIX
information about the current time and synchronization reference selected by
the SecureSync device.
PTP Grandmaster [-32]: Specifications
Figure 5-56:
PTP Grandmaster [-32]: Edit Window
1. To configure this option card, go to its
500
Inputs/Outputs: (1) Configurable as Input or Output
Signal Type and
Connector: Ethernet via SFP, and 1PPS Output via BNC
Management: Web UI
Resolution: 8ns (±4ns) packet time stamping resolution
Accuracy: 30 ns accuracy (3σ) Master to Slave, via crossover cable
Network
Speeds: 100 Mb/s, or 1Gb/s, depending on SFP module used
PTP Version
supported: PTP 2 (IEEE 1588-2008)
PTP Profiles
supported: Default, Telecom, Enterprise
Transmission
modes: Unicast [default], Multicast
Maximum Number of
Ordering
Information: 1204-32: PTP/Precision Timing Protocol Option
Module
Model 1204-32 option card rear plate
"Configuring Option Card Inputs/Outputs" on
Cards: 6
Edit
window. For instructions, see
page 364.
SecureSync 2400 User Manual
Advertisement
Table of Contents
Troubleshooting
