3.3 Managing References
To access the GNSS Receiver settings:
1. Navigate to
2. The
OR:
1. Navigate to
2. Click on the INFO button, or the GEAR button to configure the GNSS set-
3.3.3.1
Reviewing the GNSS Reference Status
To view the current status of your GNSS reference:
1. Navigate to
2. Click the INFO button next to
The "Main" tab
226
INTERFACES > REFERENCES: GNSS
Note:
Typically, there will be only one GNSS reference,
numbered "0".
GNSS 0
status window will open. To open the configuration window,
click Edit in the bottom-left corner.
INTERFACES > REFERENCES: GNSS
tings, or review GNSS reference status information.
INTERFACES
play; it contains two tabs, explained in detail below:
Satellite
Data.
>
REFERENCES: GNSS
GNSS
0. The
GNSS 0
CHAPTER
•
3
SecureSync 2400 User Manual Rev. 5.2
0.
Reference.
Reference.
status window will dis-
Main
[= default], and