Restoring The Factory Defaults; Resetting The Unit To Factory Configuration; Resetting All Configurations To Their Factory Defaults - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

Restoring the Factory Defaults

For instructions on how to restore the SecureSync's configuration files to their

factory default settings see

In certain situations, it may be desired to reset all SecureSync configurations

back to the factory default configuration. The GNSS location, any SecureSync

configurations and the locally stored log files can be cleared via the Web UI.

If SecureSync was assigned a static IP address before cleaning the con-

figurations, it will be reset to DHCP after the clean has been performed. If no

DHCP server is available after the clean operation, the static IP address will need

to be manually reconfigured.

To restore the configuration files to their factory defaults:

SecureSync 2400 User Manual Rev. 5.2

new configuration file. Once powered back up, SecureSync will be con-

figured with the previously stored file.

Restoring configurations (reloading a saved configuration),

erasing the stored GNSS location and clearing the log files are sep-

arate processes. You may restore one without restoring the others.

1. Navigate to

TOOLS > SYSTEM:

panel, click the

4.7 Backing-up and Restoring Configuration Files

"Resetting All Configurations to their Factory

Upgrade/Backup.

Restore Factory Defaults (Clear)