Safran SecureSync 2400 User Manual page 575

Command
reboot
reftable
release4
release6
renew4
renew6
resetpw
routes4
routes6
rt4add
rt4del
rt4get
rt6add
rt6del
rt6get
runtime
saveconf
savelog
scaleget
scaleset
sendnmeaudp
sendtrap
sendtrap all
services
servget
servset
SecureSync 2400 User Manual
Used to warm-boot the unit without having to disconnect or recon-
nect power
Displays reference priority table
Used with DHCP to release the IPv4 address
Used with DHCPv6 to release the IPv6 address
Used with DHCP to renew the assigned IPv4 address
Used with DHCPv6 to renew the assigned IPv6 address
Resets the administrator account (spadmin) password back to the
admin123
default value "
Displays the current IPv4 routing table(s)
Displays the current IPv6 routing table(s)
Adds an IPv4 static route
Deletes an IPv4 static route
Displays the configured IPv4 static routes
Adds an IPv6 static route
Deletes an IPv6 static route
Displays the configured IPv6 static routes
Displays the current runtime length
Generate archive of current configuration
Generate archive of all log files
Displays configured system timescale
Used to configure the system timescale
Used to configure, enable and disable the NMEA over UDP feature
"System Time Message" on page 111
(see
Triggers one type of a possible set of alarms.
Sends one instance of all alarms
Displays the state of services (enabled/disabled)
Displays the state of individual services
Enable or disable specific services
Description
"
for more information)
APPENDIX
559