Safran SecureSync 2400 User Manual page 433

PIN NOTES
4 Ground = Normal
OPEN = ALARM
5 Cable Shield
6 RS-485 – Ter-
minal
7 RS-485 – Ter-
minal
8 RS-485 – Ter-
minal
9 Cable Shield
Pin Assignment: RJ-12 Connector
Outputs: Alarm1, Alarm2, CTC3 Out, (with only one Simulcast option card
installed)
Note:
SecureSync. In the Web UI, numbering for alarm outputs for this
option card will begin at Alarm 4, which is available on the DB-9 out-
put, while Alarms 5 and 6 are assigned to the RJ-12 connector.
Figure 5-32: RJ-12 connector pin-out
Table 5-9: RJ-12 pin assignments
PIN NOTES
1 Cable Shield
SecureSync 2400 User Manual
819x Map-
SIGNAL
Major Major Alarm
Alarm
Ground Ground
Output 0 – –9.6 kHz
Output 1 – –18 kHz
Output 2 – –1PPS
GROUND GROUND
Alarm Output 0 through Alarm Output 3 are reserved by
SIGNAL
GROUND
819x Option17 Map-
ping ping
Major Alarm
Ground
– CTCSS #1
– 18 kHz
– CTCSS #2
GROUND
938x SP360 Mapping
GROUND
APPENDIX
417