Viewing An Input/Output Signal State - Safran SecureSync 2400 User Manual

APPENDIX
5.2.1.4

Viewing an Input/Output Signal State

To view if an input or output is currently enabled or disabled, go to the option
card's Status Summary panel:
1. Identify the name of the option card, (e.g.,
2. Navigate to the
All the inputs and/or outputs of this option card are listed in the Status Summary
panel.
In accordance with the Signature Control setting, and the Lock Status, the cur-
rent signal state for an
The current state of an
The Status Summary panel will be refreshed automatically every 30 seconds.
Click the Refresh button (circling arrows) on the right to refresh the status
366
of the input or output you want to configure (e.g.,
Note: If you have only one input or output of any type,
SecureSync will number that input or output 0. Additional
inputs or outputs will be numbered 1 or above.
INTERFACES > OPTION CARDS
click the list entry of the option card identified above. The option card's
Status Summary panel opens:
output
ENABLED (green); or
DISABLED (orange)
input
VALID (in green); or
INVALID (in red)
PPS OUT,
is indicated as:
signal is indicated as:
4-BNC), and the name
PPS Output 1).
drop-down menu, and
SecureSync 2400 User Manual