Safran SecureSync 2400 User Manual page 455

DCLS Signal
Connector: AM and DCLS: BNC female
Accuracy: n/a
Number of
Ordering
IRIG In/Out, BNC [1204-05]: Output Specifications
Output
(AM), 0.5V to 6V
able.
AM Carrier: IRIG B 1000 Hz, IRIG A and G 100 or 100
AM Signal
DCLS Signal
Connector: AM and DCLS: BNC female
Accuracy: see
Number of
Ordering
Figure 5-41: Model 1204-05 option card rear plate
IRIG In/Out, Fiber Opt. [1204-27]: Input Specifications
Signal: IRIG A, B, G or NASA-36, (DCLS only, unmodulated)
Operating
Optical Minimum
Fiber Optic
SecureSync 2400 User Manual
Level: TTL; 0.8V max., 2.3V min fail.; >10 kΩ load
Cards: Up to 6
Information: 1204-05, IRIG module, BNC Connector
Signal: IRIG A, B, G, E, or NASA-36, amplitude modulated sine wave
into 50 Ω; or pulse-width-coded (DCLS). User-select-
p-p
Level: 500 mV to 10 V
Level: 50 Ω TTL
"IRIG Output Accuracy Specifications" on page 604
Cards: Up to 6
Information: 1204-05, IRIG module, BNC Connector
Wavelength: 820/850 nm
Sensitivity: -25 dBm @ 820 nm
Compatibility: 50/125 μm, 62.5/125 μm multi-mode cable
[high Z]; (modulated 2:1 to 6:1).
p-p
APPENDIX
439