Safran SecureSync 2400 User Manual page 200

2.22 Signature Control
Configuring Signature Control for an Output
To review or configure the Signature Control setting for any output:
1.
2. In the
Changing Signature Control via the Front Panel
The SecureSync front panel allows you to change the signature control between
two states: Output Always Enabled and Output Always Disabled. For more
options and control over the Signature Control setting, you must use the Web UI
(see above).
On the unit front panel:
1. Press the
2. Select the output you wish to configure.
3. Use the arrow keys to select ON (enabled) or OFF (disabled). Press the
4. In the confirmation menu on the right hand side of the screen, press the
184
Navigate to INTERFACES > OUTPUTS and click the output you want to
configure.
Outputs panel, click the GEAR button for the desired output. Ehe
Edit window will open with the current Signature Control setting, and a
drop-down list to change it.
Outputs button.
enter key.
enter key again.
CHAPTER •
2 SecureSync 2400 User Manual Rev. 5.2