Safran Technical Support For Ntp; Configuring Ptp - Safran SecureSync 2400 User Manual

Hide thumbs Also See for SecureSync 2400:

Table of Contents

Safran Technical Support for NTP

Safran does not provide technical assistance for configuring and installing NTP

on Unix-based applications. Please refer to

news://comp.protocols.time.ntp.

Safran can provide support for Microsoft

https://safran-

computers/. See

tact Safran Technical Support.

Precision Time Protocol (PTP) is a time protocol that can be used to synchronize

computers on an Ethernet network. SecureSync supports PTP Version 2, as spe-

cified in the IEEE 1588-2008 standard, via two (2) Ethernet ports.

SecureSync can be configured as a PTP Master Clock or as a PTP Slave Clock.

Next to PTP specifications, this topic describes the PTP menu items and settings,

and outlines how to set up SecureSync as a PTP Master or Slave.

PTP Specifications

SecureSync 2400 User Manual Rev. 5.2

safran-navigation-timing.com

These instructions refer to the PTP available directly through

your unit via ETH0 and ETH1.

If you have a 1204-32 Grandmaster PTP option card installed, you will

need to follow separate instructions to configure that PTP func-

tionality. See

"PTP Grandmaster [1204-32]" on page 499

Inputs/Outputs: (2) Ports

Type: Ethernet

Management: Web UI

Speeds: 10/100/1000 Mb/s

supported: PTP 2 (IEEE 1588-2008)

PTP Profiles

supported: (Changing the profile selection will adjust the

default settings for the port to be configured):

Windows-based time synchronization:

timing.com/document/synchronizing-

for additional information, or con-

2.16 Configuring PTP

for NTP information and