The Securesync Web Ui; The Web Ui Home Screen - Safran SecureSync 2400 User Manual

1.7 The SecureSync Web UI
MIL-STD-810G: 500.6, 501.6, 502.6, 503.6, 507.6
MIL-STD-810H: 514.8, 516.8
1.7

The SecureSync Web UI

SecureSync has an integrated web user interface (referred to as "Web UI"
throughout this documentation) that can be accessed from a computer over a
network connection, using a standard web browser. The Web UI is the most com-
plete way to configure the unit, and for status monitoring during everyday oper-
ation.
1.7.1

The Web UI HOME Screen

The HOME screen of the SecureSync web user interface ("Web UI") provides
comprehensive status information at a glance, including:
The HOME screen can be accessed from anywhere in the Web UI, using the
HOME button in the Primary Navigation Bar:
The Primary Navigation Bar provides access to all menus:
34
Note: If you prefer, an integrated Command-Line Interpreter inter-
face (CLI) allows the use of a subset of commands. See
Line Interface" on
Note: Should it ever be necessary, you can restore SecureSync's con-
figuration to the factory settings at any time. See
to Factory Configuration" on
Note: Screens displayed in this manual are for illustrative purposes.
Actual screens may vary depending upon the configuration of your
product.
vital system information
current status of the
key performance/accuracy data
major log events.
page 554.
page 345.
references
CHAPTER
"Command-
"Resetting the Unit
•
1 SecureSync 2400 User Manual Rev. 5.2