APPENDIX
4. If you want to change any of the settings shown in the Status window, click
5. Information about the configurable settings can be found in the cor-
5.2.1.3
Configuring Option Card Inputs/Outputs
The configurable settings of any SecureSync input or output interface are access-
ible through the Edit window of the option card to which the input or output
belongs. The Edit window can be accessed in several ways; the procedure below
describes the standard way:
1. Identify the name of the card, (e.g.,
364
the
Edit
button in the bottom-left corner. The
responding option card section, see
ber" on
page 21.
of the input or output you want to configure (e.g.,
Edit
window will open:
"Option cards listed by their ID num-
PPS OUT,
4-BNC), and verify the name
PPS Output
SecureSync 2400 User Manual
1).