Show File Systems - Allied Telesis IE340 Series Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT

SHOW FILE SYSTEMS

show file systems
Overview This command lists the file systems and their utilization information where
appropriate.
show file systems
Syntax
Mode Privileged Exec
Examples To display the file systems, use the command:
awplus#
Output Figure 3-10: Example output from the show file systems command
awplus#show file systems

Size(b) Free(b)
-------------------------------------------------------------------
125.9M 111.8M
- -
10.0M 9.8M
7.0G 4.6G
- -
- -
- -
- -
- -
- -
Table 4: Parameters in the output of the show file systems command
C613-50631-01 Rev A
C
OMMANDS
show file systems
Type Flags Prefixes
flash rw flash:
system rw system:
debug rw debug:
usbstick rw usb:
fserver rw fserver:
tftp rw tftp:
scp rw scp:
sftp ro sftp:
http ro http:
rsync rw rsync:
Parameter Description
Size (b)
The total memory available to this file system. The units are given
after the value and are M for Megabytes or k for kilobytes.
Free (b)
The total memory free within this file system. The units are given
after the value and are M for Megabytes or K for kilobytes.
Type
The memory type used for this file system, such as:
flash
system
nvs
usbstick
tftp
scp
sftp
http.
Flags
The file setting options: rw (read write), ro (read only).
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
S/D/V Lcl/Ntwk
static local
virtual local
static local
dynamic local
dynamic network
- network
- network
- network
- network
- network
Avail
Y
-
Y
Y
N
-
-
-
-
-
182