Allied Telesis IE340 Series Command Reference Manual page 188

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW RUNNING CONFIG INTERFACE
Mode Privileged Exec and Global Configuration
Default Displays information for all protocols on all interfaces
Examples To display the current running configuration of your device for ports 1 to 4, use the
command:
awplus#
To display the current running configuration of a device for vlan2, use the
command:
awplus#
To display the current OSPF configuration of your device for ports 1 to 4, use the
command:
awplus#
Output Figure 3-12: Example output from show running-config interface for a
C613-50631-01 Rev A
C
OMMANDS
Parameter
ip pim dense-mode
mstp
ospf
rip
ipv6 rip
ipv6 ospf
ipv6 pim
sparse-mode
rstp
stp
show running-config interface port1.0.1-port1.0.4
show running-config interface vlan2
show running-config interface port1.0.1-port1.0.4 ospf
switchport
awplus#show running-config interface port1.0.2
!
interface port1.0.2
switchport
switchport mode access
!
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Displays running configuration for PIM-DM (Protocol
Independent Multicasting - Dense Mode) for the specified
interfaces.
Displays running configuration for MSTP (Multiple
Spanning Tree Protocol) for the specified interfaces.
Displays running configuration for OSPF (Open Shortest
Path First) for the specified interfaces.
Displays running configuration for RIP (Routing Information
Protocol) for the specified interfaces.
Displays running configuration for RIPng (RIP for IPv6) for
the specified interfaces.
Displays running configuration for IPv6 OSPF (Open
Shortest Path First) for the specified interfaces.
Displays running configuration for PIM-SM (Protocol
Independent Multicast - Sparse Mode) for the specified
interfaces.
Displays running configuration for RSTP (Rapid Spanning
Tree Protocol) for the specified interfaces.
Displays running configuration for STP (Spanning Tree
Protocol) for the specified interfaces.
188