F
C
M
ILE AND
ONFIGURATION
ANAGEMENT
-
ERASE FACTORY
DEFAULT
erase factory-default
Overview
This command erases all data from NVS and all data from flash except the
following:
•
•
•
The device is then rebooted and returned to its factory default condition. The
device can then be used for AMF automatic node recovery.
erase factory-default
Syntax
Mode
Privileged Exec
Usage notes
This command is an alias to the
Example
To erase data, use the command:
Node_1#
This command will erase all NVS, all flash contents except for
the boot release, a GUI resource file, and any license files,
and then reboot the switch. Continue? (y/n):y
Related
atmf cleanup
commands
C613-50631-01 Rev A
C
OMMANDS
the boot release file (a .rel file) and its release setting file
all license files
the latest GUI release file
erase factory-default
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
atmf cleanup
command.
168