Checking Fuel Pressure Sender G247 - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Bit (27 mm) - T40218- or commercially available socket
(27 mm)
Removing
– Unplug the electrical connector -1-.
Note
Use cloth to catch escaping fuel.
– Unscrew fuel pressure sender - G247- -2- using socket 27 mm
- T40218- .
Installation
Installation is carried out in the reverse order. Please note the
following:
Note
Do not lubricate thread of fuel pressure sender.
Specified torques
♦ ⇒ "2.1 Assembly overview - fuel rail with injectors", page 210
5.3 Checking fuel pressure sender - G247-
Special tools and workshop equipment required
♦ Vehicle diagnosis and service information system
♦ Test instrument adapter/DSO (3-pin) - VAS 5570-
♦ Pressure sensor tester - VAS 6394-
♦ Socket, 27 mm (commercially available)
236
Rep. gr.24 - Mixture preparation - injection
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.