Removing And Installing Engine; Removing And Positioning The Engine; Engine: Dismounting - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
10 –

Removing and installing engine

1

Removing and positioning the engine

⇒ "1.1 Engine: dismounting", page 7
⇒ "1.2 Separating engine and gearbox", page 18
⇒ "1.3 Securing engine to engine and gearbox support",
page 19
⇒ "1.4 Engine: fitting", page 21
1.1

Engine: dismounting

Special tools and workshop equipment required
♦ Support tool - 2024A-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
♦ Workshop crane - VAS 6100-
♦ Support tool - T10038-
♦ Locking pin - T10060 A-
♦ Engine bung set - VAS 6122-
♦ Drip tray for workshop hoist - VAS 6208-
♦ Hose clip pliers - VAS 6362-
♦ Protective glasses
♦ Protective gloves
León 2013 ➤ , León ST 2013 ➤
1. Removing and positioning the engine
7