Removing And Installing Engine Mountings; Removing And Installing Gearbox Mounting - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Slide the spindles - 10 - 222 A /10- -2- onto the counterholder
- 10 - 222 A- .
– Screw in the adapter - 10 - 222 A /8- -3- into the counterholder
- 10-222 A- -1-.
– Insert the carrying device - 10 - 222 A- -1- and the adapter -
10 - 222 A /8- -3- on left and right onto longitudinal members
as shown.
Observe the position and setting of the gauge - T40045- -4-
⇒ page 28 .
– Fit the shackle - 10 - 222 A /12- -5- into the lifting eyes of the
engine left and right.
– Hook the karabiners of the spindles - 10 - 222 A /10- -2- into
the shackle - 10 - 222 A /12- -5-.
– Take up weight of engine/gearbox assembly with spindle, but
without raising it.
2.3 Removing and installing engine mount‐
ings
Removing
– Loosen hose -2- for activated carbon filter.
– Disconnect connector -1-.
– Release detent using a screwdriver -arrow- and place coolant
expansion tank to one side.
– Support engine and gearbox in installation position
⇒ page 26 .
– Unscrew and remove the screws -Arrows- and remove engine
mounting -1-.
Installation
Installation is carried out in the reverse order. Please note the
following:
– Check adjustment of assembly mountings (engine/gearbox
mountings) ⇒ page 32
Specified torques:
♦ ⇒ "2.1 Exploded view - assembly mountings", page 25
♦ ⇒ General body repairs, exterior; Rep. gr. 63 ; Front bumper;
Assembly overview - bumper cover
2.4 Removing and installing gearbox
mounting
Removing
– Support engine and gearbox in installation position
⇒ page 26 .
– Remove battery tray ⇒ Electrical system; Rep. gr. 27 ; Battery;
Removing and installing battery tray .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
.
León 2013 ➤ , León ST 2013 ➤
2. Assembly mountings
29