Seat Leon 2013 Workshop Manual page 181

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Hose clamps, up to Ø 25 mm - 3094-
♦ Hose clip pliers - VAS 6362-
Removing
CAUTION
The cooling system is under pressure when the engine is hot.
Hot steam/hot coolant can escape - risk of scalding.
Risk of scalding to skin and body parts.
– Wear protection gloves.
– Use safety goggles.
– Reduce pressure by covering the cap of the coolant expan‐
sion tank with cloths and opening it carefully.
– Open filler cap -arrow- on coolant expansion tank.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
3. Coolant pipes
175