Seat Leon 2013 Workshop Manual page 141

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Unscrew securing bolts -arrows- and remove tensioning ele‐
ment.
– Remove alternator ⇒ Electrical system; Rep. gr. 27 ; Alter‐
nator; Removing and installing alternator .
– Remove crankshaft oil seal on belt pulley end
– Unscrew oil pump securing bolts -1- and -2-.
– Pull oil pump off dowel pins on cylinder block in a straight line.
– Remove gasket -1- from dowel pins -arrows-.
Installation
– Fit new gasket -1- onto dowel pins -arrows-.
⇒ page 46
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
.
135
1. Sump, oil pump