Spark Plug Test Data; Removing And Installing Ignition Coils With Output Stages - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
8 - O-ring
9 - Sender wheel
❑ For engine speed sender - G28-
❑ Removing and installing
10 - Sealing flange (gearbox end)
❑ Removing and installing
11 - Engine speed sender - G28-
❑ Removing and installing
12 - Bolt
❑ 4.5 Nm
1.2

Spark plug test data

Engine codes
Order of starting
Part number
Electrode gap
Tightening torque
Change interval
1) Current spark plugs ⇒ Electronic parts catalogue (ETKA)
1.3 Removing and installing ignition coils
with output stages
Special tools and workshop equipment required
♦ Puller - T10530-
⇒ page 51
⇒ page 51
⇒ page 272
Spark plugs
1)
⇒ Maintenance ; Booklet 501 ; Additional work according to
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
CJZA, CJZB, CYVA, CYVB
1-3-4-2
04E 905 601
0.70 ... 0.80 mm
22 Nm
time or mileage
269
1. Ignition system