Exploded View - Electric Coolant Pump - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
Installation position of thermostat for large cooling circuit
• Must be positioned with centring pin in guide -arrow- in ther‐
mostat housing.
Thermostat housing to coolant pump - tightening torque and se‐
quence
– Tighten bolts in the sequence -A ... F- to 8 Nm.
Cover for thermostat to thermostat housing - tightening torque
– Tighten bolts for cover -1- in the sequence -A ... D- to 7 Nm.
2.2

Exploded view - electric coolant pump

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
2. Coolant pump/thermostat assembly
159