4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
3.5.2
Removing and installing exhaust cam‐
shaft oil seal, pulley end
Special tools and workshop equipment required
♦ Assembly tool - T10478 B-
♦ Puller hooks - T20143-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
Removing
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Remove toothed belt pulley.
⇒ "3.4 Removing and installing toothed belt pulley",
page 108
– Remove seal -1- using extractor hook -T20143/1- .
Installation
Note
Do not lubricate new seal.
León 2013 ➤ , León ST 2013 ➤
3. Valve control
113