León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Loosen bolt -arrow- of the vibration damper, using the coun‐
terhold tool - T10475- to do so.
– Remove bolt and take off vibration damper.
– Unscrew bolts -arrows-, and remove lower toothed belt guard.
– Remove bolts -1, 2, 3- and detach pendulum support.
– Support engine and gearbox in installation position
⇒ page 26
.
– Remove bolts -arrows- and detach engine mounting -1-.
44
Rep. gr.13 - Crankshaft group
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.