Seat Leon 2013 Workshop Manual page 272

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Unscrew right nut -arrow- of bracket.
– Unscrew left nut -arrow- of bracket.
– Remove heat shield. ⇒ General body repairs, exterior; Rep.
gr. 66 ; Underbody cover; Assembly overview – underbody
panels
– Remove bolts -arrows-.
– Detach tunnel cross-piece (front) -1-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Remove bolts -arrows-.
– Detach electrical connector from bracket and move clear wir‐
ing to Lambda probe.
266
Rep. gr.26 - Exhaust system