Seat Leon 2013 Workshop Manual page 21

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Release catches -arrows- and detach cover -1- for electronics
box in engine compartment.
– Release catch using a screwdriver -arrow- and detach cover
-1- for electronics box in engine compartment upwards.
– Remove nut -2- and screw -3- and disconnect electrical lines
-arrow-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Unplug electrical connectors -1- and -2-.
– Remove line sections from the mounts and lay on the engine.
León 2013 ➤ , León ST 2013 ➤
1. Removing and positioning the engine
15