Turbo Compressor: Removing And Fitting - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
16 - Coolant lines
❑ Supply and return
17 - Bolt
❑ 8 Nm
18 - O-ring
❑ renew
❑ Lubricate lightly with engine oil
19 - Bolt
❑ 9 Nm
1.2

Turbo compressor: removing and fitting

Special tools and workshop equipment required
♦ Engine bung set - VAS 6122-
♦ Hose clip pliers - VAS 6362-
♦ Release tool - T10527- and -T10527/1-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
1. Turbocharger
191