Seat Leon 2013 Workshop Manual page 196

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
1 - Oil return pipe
2 - O-ring
❑ renew
❑ Lubricate lightly with en‐
gine oil
3 - Bolt
❑ 9 Nm
4 - O-ring
❑ renew
5 - Bolt
❑ 9 Nm
6 - Oil supply line
7 - O-ring
❑ renew
❑ Lubricate lightly with en‐
gine oil
8 - Bolt
❑ 9 Nm
9 - Bolt
❑ renew
Note
Bolts are provided with a coating.
They must be renewed after remov‐
al!
❑ 5 Nm
10 - O-ring
❑ If there is damage re‐
place hose for crank‐
case breather ⇒ Item 11 (page 190)
❑ Lubricate lightly with engine oil
11 - Flexible pipe
❑ For crankcase breather
12 - Bolt
❑ renew
Note
Bolts are provided with a coating.
They must be renewed after remov‐
al!
❑ 5 Nm
13 - O-ring
❑ If there is damage replace hose for crankcase breather
❑ Lubricate lightly with engine oil
14 - Turbocharger
❑ Removing and installing
15 - Seal
❑ renew
190
Rep. gr.21 - Turbocharging/supercharging
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 191
⇒ Item 11 (page 190)