Seat Leon 2013 Workshop Manual page 229

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Ultrasonic cleaning unit - VAS 6418-
♦ Mounting plate for injection modules - VAS 6418/1-
♦ Cleaning agents: ⇒ Electronic parts catalogue
Note
Risk of malfunction caused by ultrasonic cleaning of injectors
♦
which are not approved for this purpose.
Depending on the vehicle type, production date and injection
♦
pressure, injectors from different suppliers may be used.
Ultrasonic cleaning is only permissible for injectors from Con‐
♦
tinental.
Identify the part number or the relevant supplier as follows:
♦
⇒ page 223
Allocation is done using ⇒ Electronic parts catalogue .
♦
Identifying supplier or part number:
Position -A-: Information of the supplier.
Item -B-: part number.
Note
Ultrasonic unit must be filled with cleaning agent up to upper
♦
edge of holes (see expanded view).
Observe safety instructions and operating instructions for ul‐
♦
trasonic unit.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
223
2. Injectors