Seat Leon 2013 Workshop Manual page 212

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
6 - Radiator outlet coolant temperature sender - G83-
❑ Removing and installing
7 - Hall sender - G40- (camshaft position sensor)
❑ Exploded view ⇒ page 268
8 - Throttle valve control mechanism - GX3-
❑ comprising:
Throttle valve control mechanism - J338-
Throttle valve drive (electric power control) - G186-
Throttle valve drive angle sender 1 (electric power control) - G187-
Throttle valve drive angle sender 2 (electric power control) - G188-
❑ Exploded view ⇒ page 228
9 - Charge air pressure sender - GX26-
❑ comprising:
Charge-air regulator - G31-
Intake air temperature sensor - G42-
❑ Exploded view ⇒ page 197
10 - Intake manifold sender - GX9-
❑ comprising:
Intake air temperature sender 2 - G299-
Intake manifold pressure sender - G71-
❑ Exploded view ⇒ page 228
11 - Charge air cooling pump - V188-
❑ Exploded view ⇒ page 159
12 - Ignition coils with output stages
♦ Ignition coil 1 with output stage - N70-
♦ Ignition coil 2 with output stage - N127-
♦ Ignition coil 3 with output stage - N291-
♦ Ignition coil 4 with output stage - N292-
❑ Removing and installing
206
Rep. gr.24 - Mixture preparation - injection
⇒ page 172
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 269