Cylinder Block, Gearbox End; Exploded View - Cylinder Block, Gearbox End - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
2

Cylinder block, gearbox end

⇒ "2.1 Exploded view - cylinder block, gearbox end", page 49
⇒ "2.2 Removing and installing flywheel", page 50
⇒ "2.3 Removing and installing sealing flange (gearbox end)",
page 51
2.1

Exploded view - cylinder block, gearbox end

Note
For assembly work, secure engine to engine and gearbox support
1 - Bolt
❑ renew
❑ 60 Nm + 90°
2 - Flywheel
❑ Removing and installing
⇒ page 50
❑ Fitting possible in one
position only.
3 - Engine speed sender -
G28-
❑ Removing and installing
⇒ page 272
4 - Bolt
❑ Tightening torque
⇒ page 268
5 - Split pin
❑ 2 pieces
6 - Shim
❑ Do not damage or bend
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
when assembling
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
❑ Fitting ⇒ page 50
7 - Bolt
❑ Tightening torque and
sequence ⇒ page 50
8 - Sealing flange with sender
crown and seal
❑ Renew sealing flange
complete with oil seal
and sender wheel only.
❑ Removing and installing
⇒ page 51
.
León 2013 ➤ , León ST 2013 ➤
⇒ page 19 .
2. Cylinder block, gearbox end
49