Reducing Fuel Pressure In High-Pressure Section - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
1.1.3 Overview of fitting locations – engine, exhaust side
1 - Oil level/oil temperature
sender - G266-
❑ Removing and installing
⇒ page 137
2 - Coolant temperature send‐
er - G62-
❑ Removing and installing
⇒ page 171
1.2 Reducing fuel pressure in high-pressure
section
CAUTION
The fuel system is under high pressure.
Risk of injury due to fuel which may spurt out.
– Release high pressure.
Special tools and workshop equipment required
♦ Vehicle diagnosis and service information system

Reducing fuel pressure in high-pressure section:

– Connect vehicle diagnosis tester and then carry out the func‐
tion "Reducing high fuel pressure" in "Guided functions".
• Fuel pressure will drop to a specified value.
– Switch off ignition.
208
Rep. gr.24 - Mixture preparation - injection
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.