Check Oil Pressure And Oil Pressure Switch - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ 24 mm jointed spanner - T40175-
Removing
– Pull activated charcoal filter solenoid valve 1 - N80- -3- off in‐
take manifold and push it downwards slightly.
– Unplug the electrical connector -2-.
Note
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Use cloth to catch escaping engine oil.
– Unscrew oil pressure switch for reduced oil pressure - F378-
-1-.
Installation
Installation is carried out in the reverse order. Please note the
following:
Note
Insert the new oil pressure switch for reduced oil pressure - F378-
immediately so that no larger amounts of oil can escape.
– check oil level⇒ Maintenance ; Booklet 501 .
Specified torques
♦ ⇒ "4.1 Exploded view - oil filter housing/oil pressure switches",
page 143
4.3 Check oil pressure and oil pressure
switch
Special tools and workshop equipment required
♦ Oil pressure tester - V.A.G 1342-
144
Rep. gr.17 - Lubrication