Seat Leon 2013 Workshop Manual page 220

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Removing fuel rail
⇒ "2.2 Removing and installing fuel rail", page 211
– Remove O-ring -3- from injector -1-.
– Unplug electrical connector from corresponding injector.
– Lever support ring -1- off injector using a screwdriver -2-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
– Fit impact sleeve -T10133/18- over injector.
214
Rep. gr.24 - Mixture preparation - injection
respect to the correctness of information in this document. Copyright by SEAT S.A.
.