Seat Leon 2013 Workshop Manual page 17

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Lift the air conditioner compressor with connected refrigerant
pipes and, using the supporting tool - T10038- , fix on the lock
carrier and suspend. Proceed with great care in order not to
damage the system.
Continued for all vehicles:
– Lift the retaining clip -arrow-, remove the coolant hose at the
top left from the radiator.
– Lift the retaining clip -arrow-, remove the coolant hose at the
top right from the water radiator for the charge air cooling cir‐
cuit.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Release catch -arrow-, disconnect vacuum line -1-.
– Move clear vacuum hose at air intake pipe -2-.
León 2013 ➤ , León ST 2013 ➤
1. Removing and positioning the engine
11