Seat Leon 2013 Workshop Manual page 137

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Socket and key - T10058-
♦ Torque wrench - V.A.G 1331-
♦ Hand drill with plastic brush
♦ Flat scraper
♦ Silicone sealant D 176,501 A1
Removing
– Drain the engine oil.
– Remove oil filter with oil filter tool - 3417- .
Remove poly V-belt ⇒ page 38
Only vehicles with air conditioner
Note
The air conditioning system lines must not be opened.
♦
Prevent damage to condenser and refrigerant lines and hoses.
♦
Do NOT stretch, kink or bend lines and hoses.
♦
– Remove the air conditioner compressor ⇒ Heating, Air con‐
ditioner; Rep. gr. 87 ; Air conditioner compressor; Removing
the air conditioner compressor from the bracket and installing
it in the bracket .
– Secure AC compressor to lock carrier.
Make sure lines are not kinked.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
.
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
1. Sump, oil pump
131