Removing And Installing Resonator For Intake Air - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
3.3 Removing and installing resonator for
intake air
Removing
– Open hose clips -1- and -2-.
– Remove resonator for intake air.
Installation
Reassembly is carried out in the reverse order; note the following:
Note
Reinstall hose clips in their original positions.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
227
3. Air filter