Intake Manifold; Intake Manifold - Exploded View - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
4

Intake manifold

⇒ "4.1 Intake manifold - exploded view", page 228
⇒ "4.2 Removing and installing intake manifold", page 229
⇒ "4.3 Removing and installing throttle valve module GX3 ", page
232
⇒ "4.4 Cleaning throttle valve module", page 233
4.1

Intake manifold - exploded view

1 - Coolant pipe
❑ Clipped onto intake
manifold.
2 - Intake manifold
❑ Combined with charge
air cooler
❑ Removing and installing
⇒ page 229
3 - Coolant pipe
❑ Clipped onto intake
manifold.
4 - Bolt
❑ Tightening torque and
sequence ⇒ page 229
5 - O-ring
❑ renew
6 - Intake manifold sender -
GX9-
❑ comprising:
Intake air temperature
sender 2 - G299-
Intake manifold pressure
sender - G71-
❑ Removing and installing
⇒ page 235
7 - Seals
❑ renew
8 - Charge air pressure sender
- GX26-
❑ comprising:
Charge-air regulator - G31-
Intake air temperature sensor - G42-
❑ Removing and installing
9 - O-ring
❑ renew
10 - Connection
11 - O-ring
❑ renew
❑ Before installing, lightly moisten O-ring with clean engine oil
228
Rep. gr.24 - Mixture preparation - injection
.
⇒ page 200
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.