Seat Leon 2013 Workshop Manual page 230

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
Clean
– Remove injectors ⇒ page 212
– Insert injectors -1- all the way into mounting plate for injection
modules - VAS 6418/1- -item 2-.
– Immerse injectors together with mounting plate for injection
modules - VAS 6418/1- into cleaning fluid - VAS 6418/2- .
– Set rotary knob -4- to a temperature of 50°C.
– Select a cleaning time of 30 minutes with rotary knob -5-.
– Switch on ultrasonic unit with button -3-.
Note
The time set starts to elapse as soon as a cleaning temperature
of 50°C has been reached.
– After cleaning, renew combustion chamber ring seal for each
injector ⇒ page 212
224
Rep. gr.24 - Mixture preparation - injection
.
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.