Seat Leon 2013 Workshop Manual page 20

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Detach electrical connectors -2- and -3- from the bracket and
separate.
– Open the cable duct -2- upward
-in the direction of the arrow-.
Note
Item -1- can be disregarded.
– Move electrical wiring clear.
– Unplug the electrical connector -2-.
Note
Item -1- can be disregarded.
– Unscrew earth cable on the bodywork.
– Remove nuts -arrows- and detach bracket -1-.
Note
Different types of brackets are fitted depending on version.
14
Rep. gr.10 - Removing and installing engine
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.