Seat Leon 2013 Workshop Manual page 135

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
Markings on oil dipstick
1 - Max. mark
2 - Min. mark
a - Zone between upper ridge of printed area and max. mark: do
not add oil
b - If the level is within the printed area, oil may be added
c - Area min marking up to screened field: refill with max. 0.5 l
engine oil!
Oil drain plug with lock seal (factory fitting)
– Discard the oil drain plug with lock seal -1- at the first oil
change.
– Install a new oil drain plug -3- with replaceable seal -2-.
Oil drain plug with replaceable seal (all subsequent oil changes).
– Screw out the oil drain plug -2- and discard the used seal -3-.
– You can replace the new seal -1- individually at the subse‐
quent oil changes.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
1. Sump, oil pump
129