León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Assembly tool - T10479 A-
♦ Puller hooks - T20143-
Removing
– Remove toothed belt pulley for coolant pump
⇒ page 166
.
– Carefully fit extractor hook -T20143/1- between camshaft and
seal -1-.
– Lever out seal.
Installation
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Note
Do not lubricate new seal.
115
3. Valve control