Seat Leon 2013 Workshop Manual page 100

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Tighten bolt -1- of camshaft adjuster on inlet side -2- initially
to 50 Nm.
– Use counter-hold tool - T10554/1- and counter-hold tool -
T10172- to do this.
• After the toothed belt has been fitted and the bolts have been
secured, the engine should be cranked clockwise by one com‐
plete turn.
• Crank engine until the camshafts and crankshaft have re‐
turned to TDC position.
Rotate crankshaft to "TDC" as follows:
– Set piston in cylinder no. 1 to TDC position.
⇒ "2.3 Checking distribution timing", page 84
– Tighten bolt -1- to final specified torque
⇒ "2.2 Exploded view - toothed belt", page 83
hold tool - T10172- with adapter -T10172/1- and -T10172/2- .
– Use counter-hold tool - T10554/1- and counter-hold tool -
T10172- to lock camshaft in position (push in »clockwise
direction«).
– Tighten bolt -1- for camshaft adjuster to final specified torque
⇒ "2.2 Exploded view - toothed belt", page 83
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
– Tighten plug -1- to specified torque.
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ "2.2 Exploded view - toothed belt", page 83
– Use counter-hold tool - T10172- with counter-hold tool -
T10554/1- to do this.
Perform remaining installation steps in reverse sequence of re‐
moval.
Specified torques
♦ ⇒ "2.2 Exploded view - toothed belt", page 83
♦ ⇒ "1.2 Exploded view - camshaft housing", page 70
♦ ⇒ "3.1 Exploded view - crankcase breather system",
page 140
♦ ⇒ "2.1 Exploded view - coolant pump and thermostat",
page 157
♦ ⇒ "2.1 Assembly overview - charge air system", page 197
♦ ⇒ General body repairs, exterior; Rep. gr. 66 ; Noise insula‐
tion; Assembly overview - noise insulation
94
Rep. gr.15 - Cylinder head, valve gear
using counter-
.